Landlord EICR in Strood

CJA Electrical does landlord EICR work across Strood and the wider Medway area — private landlords with one or two rentals, accidental landlords renting out a former main residence, and letting agents managing multi-property portfolios. The 2020 PRS regulations set the cycle (every 5 years and at the start of any new tenancy) and the consequences for non-compliance (civil penalties up to £30,000 from Medway Council). The work runs out of Rochester and Strood sits within a 8-minute reach.

What Landlord EICR actually is

A landlord EICR is the same fundamental inspection as any EICR — a visual check of the consumer unit and accessible accessories, plus dead and live testing on every circuit — but commissioned to satisfy the 2020 PRS regulations. The output is a written report against BS 7671:2018+A2:2022, with observation codes (C1/C2/C3/FI) on anything that doesn’t meet the regulations. What’s specific to the landlord version is the documentation flow: the certificate must be supplied to existing tenants within 28 days of the inspection, to new tenants before they take occupation, and to Medway Council on request within 7 days. Reports formatted to the standard BS 7671 layout are accepted across the industry.

When you need Landlord EICR in Strood

Two specific triggers apply to landlord EICRs: every five years on a rolling cycle, and at the start of any new tenancy. For most Strood private rented property, that means the 5-year cycle is the main scheduling driver, with new-tenancy testing slotting in when properties change tenants between cycles. Beyond the regulatory triggers, common voluntary triggers we see in Medway: a portfolio acquisition (new landlord taking over property where the existing certificate is questionable), a major refurbishment (recircuiting, consumer unit replacement), insurance renewal where the underwriter has asked for a current certificate, and council action where a tenant complaint has triggered an enforcement visit.

Standards and what compliance looks like

The technical standard is BS 7671:2018+A2:2022 — the 18th Edition of the Wiring Regulations with Amendment 2. Any landlord EICR signed off after January 2023 should reference that version. The 2022 amendment introduced changes around surge protection (now required on most domestic installations), arc fault detection in some circumstances, and updated requirements for outdoor and EV charging circuits. For landlord property specifically, the additional layer is the 2020 PRS regulations — the document supplied to tenants needs to be the standard EICR format (BS 7671 Appendix 6) signed by a qualified inspector, with the schedule of inspections and test results attached.

Testing schedule and remedials

On site, landlord EICR testing is non-disruptive — the work is quiet, brief power-downs are limited to 5-10 minutes per circuit, and the testing equipment is non-destructive. Tenants typically don’t need to be home for the whole visit, just to provide access at the start. Testing follows the standard BS 7671 sequence: inspection of the consumer unit and accessories first, then dead testing (continuity, insulation resistance, polarity, ring continuity) on each circuit, then live testing (earth fault loop, RCD operation) once the supply’s restored. Each circuit’s results are recorded individually on the schedule of test results.

Why Strood property owners book CJA Electrical

CJA Electrical works with private landlords and letting agents across Medway. Strood sits within the 8 -minute working radius of our Rochester base, so scheduling around tenant availability is straightforward and re-tests after remedial work happen quickly. What landlords and agents tell us matters: same-week appointments, certificates inside 48 hours, reports formatted to satisfy Medway Council requests, and remedial work quoted clearly so the budget decision is straightforward. Same person on site, same person signing the certificate, no subcontracting.

How the work runs

Step one — the booking. We need property details (address, bedrooms, rough age of installation, any known issues) and the contact for tenant access (agent or tenant direct). Quote confirmed on that call for standard property; site visit first for unusual installations or HMO conversions. Step two — the testing visit. Half a day for most Strood three-bed rental property; longer for HMOs and larger conversions. Brief power-downs during dead testing flagged in advance to the tenant. Property left exactly as found. Step three — the report. PDF inside 48 hours, supplied to landlord and agent. Remedials, if needed, quoted separately. Re-test scheduled once remedials are complete.

What affects the price

Landlord EICR pricing is fixed-price for most Strood domestic rental property. The price is driven by circuit count more than floor area — a small flat with 6-8 circuits is at one end, a larger detached house with multiple consumer units and 20+ circuits is at the other. Portfolio landlords and letting agents get bulk pricing where it makes sense — same-day testing of multiple properties near each other, or scheduled blocks of work across a portfolio where we can build a route. Remedial work is always quoted separately so the EICR price stays clean and predictable.

FAQs

Can the certificate be sent direct to my agent?

Yes. The PDF can go to you, your letting agent, your council, or all of the above. Medway Council accepts the standard BS 7671 Appendix 6 format, as do all the major letting agents and managing agents we’ve worked with.

What if the report is unsatisfactory?

An unsatisfactory report just means there are C1 or C2 observations that need clearing before the property is compliant. CJA Electrical can quote separately for the remedial work, and once it’s done a re-test confirms the installation is satisfactory. A fresh certificate is issued documenting the post-remedial state.

Do I need a fresh EICR every time I get a new tenant?

Not necessarily. The 2020 regulations say a satisfactory EICR must be in place at the start of any new tenancy. If the existing certificate is current (less than 5 years old) and the property hasn’t been altered since, that certificate is valid for the new tenancy too. A fresh EICR is only legally required if the existing one is expired, missing, or unsatisfactory.

Will the inspection disrupt my tenant?

Minimally. The on-site time is half a day for a typical three-bed home. Brief power-downs during dead testing are a few minutes per circuit. The tenant doesn’t need to stay in for the whole visit — just to provide access at the start. We work quietly and leave the property exactly as we found it.

How fast can I get a certificate if I need one urgently?

Same-week is standard. If a tenant move-in or insurance renewal deadline is tight, we can usually fit an inspection in within 24-48 hours of booking. Reports are turned around same-evening or next-morning where the deadline calls for it — just let us know up front.

Do I need a separate certificate for each property in my portfolio?

Yes. Each rental property needs its own EICR — addresses, circuit details, and observations are property-specific. For portfolio landlords with several properties due at the same time, we can schedule the visits efficiently and bulk-deliver the certificates so the agent has the full portfolio in hand at once.

What about EICRs for HMOs?

HMO landlord EICRs follow the same 5-yearly cycle as ordinary rented homes, but typically also align with the HMO licence cycle issued by Medway Council. HMOs often have shared common-parts circuits (corridor lighting, fire alarm interface, escape route lighting) that get tested separately. We work to whatever the council specifically requires for the licence renewal.