Landlord EICR in Gillingham

For Medway landlords, the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020 made the 5-yearly EICR legally non-negotiable. Every privately rented home in England needs a satisfactory report at least every five years, plus a fresh one at the start of any new tenancy. CJA Electrical does the inspection, the report, and (separately) any remedial work to clear an unsatisfactory report.

What Landlord EICR actually is

Landlord EICRs are governed by the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020. The inspection and the technical standards are the same as any other EICR — BS 7671:2018+A2:2022, observation codes, dead and live testing — but the regulations layer on top a defined cycle (5 years), a defined documentation flow (tenants and council get copies), and defined consequences (civil penalties up to £30,000 for non-compliance). The inspector’s job is the same regardless of who’s commissioning the work. What’s different is the paperwork and the deadlines — keeping the cycle on schedule, getting the certificate to the tenant inside 28 days, supplying it to the council if asked.

When you need Landlord EICR in Gillingham

The 5-yearly cycle plus new-tenancy rule is the headline. The practical scheduling reality for most Gillingham landlords is a rolling diary — set a reminder a couple of months before the certificate expires and book the re-test in good time so any remedials don’t bump the property into out-of-compliance territory at the renewal date. Letting agents typically manage this on behalf of the landlord via a portfolio diary; private landlords often track it via the expiry date on their last certificate. Either way, getting the inspection done a couple of months ahead of expiry gives breathing room for any remedials needed before the deadline actually bites.

Standards and what compliance looks like

The technical standard is BS 7671:2018+A2:2022 — the 18th Edition of the Wiring Regulations with Amendment 2. Any landlord EICR signed off after January 2023 should reference that version. The 2022 amendment introduced changes around surge protection (now required on most domestic installations), arc fault detection in some circumstances, and updated requirements for outdoor and EV charging circuits. For landlord property specifically, the additional layer is the 2020 PRS regulations — the document supplied to tenants needs to be the standard EICR format (BS 7671 Appendix 6) signed by a qualified inspector, with the schedule of inspections and test results attached.

Testing schedule and remedials

What gets tested on a landlord EICR: every circuit running off the consumer unit (lighting, sockets, immersion, cooker, shower, boiler), every accessible accessory (sockets, switches, light fittings, fan isolators), the consumer unit itself (visual inspection of devices and connections), and the main earthing and bonding at the intake. Common findings on Gillingham rental property: ageing consumer units missing RCD protection on lighting circuits; loose backbox screws on tenant-occupied properties (where wear and tear has shifted faceplates); unprotected cable runs in lofts where tenants have been into the loft for storage; cracked switch plates from impact damage. Most are C2 or C3 — fixable, not catastrophic.

Why Gillingham property owners book CJA Electrical

Three things matter on landlord EICR work: turnaround (certificate inside 48 hours so the agent or landlord can move on the next step), format (BS 7671 Appendix 6 layout that Medway Council accepts), and remedial pricing (clear line-by-line quotes against the report so the landlord can decide what to action). All three are why agents and landlords across Medway keep coming back. Operationally, the things that matter on letting work — fast scheduling, agent-friendly comms, certificates direct to the agent if requested — are all covered as standard.

How the work runs

Step one — the booking. We need property details (address, bedrooms, rough age of installation, any known issues) and the contact for tenant access (agent or tenant direct). Quote confirmed on that call for standard property; site visit first for unusual installations or HMO conversions. Step two — the testing visit. Half a day for most Gillingham three-bed rental property; longer for HMOs and larger conversions. Brief power-downs during dead testing flagged in advance to the tenant. Property left exactly as found. Step three — the report. PDF inside 48 hours, supplied to landlord and agent. Remedials, if needed, quoted separately. Re-test scheduled once remedials are complete.

What affects the price

Pricing is transparent. A fixed price for the inspection, testing, and report, set on a brief scoping call with the agent or landlord. Separate quoting for any remedial work based on the report observations. Larger HMOs, multi-occupancy conversions, or properties with multiple consumer units get a capped quote after a quick site visit. The cap means certainty on the maximum cost going in. Re-tests after remedials are included in the original inspection price for the affected circuits.

FAQs

Can the certificate be sent direct to my agent?

Yes. The PDF can go to you, your letting agent, your council, or all of the above. Medway Council accepts the standard BS 7671 Appendix 6 format, as do all the major letting agents and managing agents we’ve worked with.

What if the report is unsatisfactory?

An unsatisfactory report just means there are C1 or C2 observations that need clearing before the property is compliant. CJA Electrical can quote separately for the remedial work, and once it’s done a re-test confirms the installation is satisfactory. A fresh certificate is issued documenting the post-remedial state.

Do I need a fresh EICR every time I get a new tenant?

Not necessarily. The 2020 regulations say a satisfactory EICR must be in place at the start of any new tenancy. If the existing certificate is current (less than 5 years old) and the property hasn’t been altered since, that certificate is valid for the new tenancy too. A fresh EICR is only legally required if the existing one is expired, missing, or unsatisfactory.

Will the inspection disrupt my tenant?

Minimally. The on-site time is half a day for a typical three-bed home. Brief power-downs during dead testing are a few minutes per circuit. The tenant doesn’t need to stay in for the whole visit — just to provide access at the start. We work quietly and leave the property exactly as we found it.

How fast can I get a certificate if I need one urgently?

Same-week is standard. If a tenant move-in or insurance renewal deadline is tight, we can usually fit an inspection in within 24-48 hours of booking. Reports are turned around same-evening or next-morning where the deadline calls for it — just let us know up front.

Do I need a separate certificate for each property in my portfolio?

Yes. Each rental property needs its own EICR — addresses, circuit details, and observations are property-specific. For portfolio landlords with several properties due at the same time, we can schedule the visits efficiently and bulk-deliver the certificates so the agent has the full portfolio in hand at once.

What about EICRs for HMOs?

HMO landlord EICRs follow the same 5-yearly cycle as ordinary rented homes, but typically also align with the HMO licence cycle issued by Medway Council. HMOs often have shared common-parts circuits (corridor lighting, fire alarm interface, escape route lighting) that get tested separately. We work to whatever the council specifically requires for the licence renewal.