EICR for Developers in Minster-on-Sea, Kent

Developer compliance for electrical work splits into two streams. New installations — circuits added during build, refurb, or conversion — produce an Electrical Installation Certificate (EIC) at commissioning. Existing installations being inspected periodically produce an EICR. We work with Minster-on-Sea developers on both: EIC for new work signed off as it goes in, EICR on existing installations inherited through purchase or returned to service after refurb.

What an EICR involves for Developer

A developer EICR follows the same regulatory standard as any domestic EICR (BS 7671:2018+A2:2022) but is most often commissioned in one of three contexts: ahead of a refurbishment to document the starting condition; after refurbishment of a pre-existing installation, where the existing wiring has been adapted but not replaced; or as periodic inspection on a phased development whose earlier phases are already occupied. New circuits don’t get an EICR — they get an EIC at commissioning. We do both, with the right document for the right job.

When you need this in Minster-on-Sea

Common developer scenarios for an EICR in Minster-on-Sea: - Acquisition due diligence on a property being purchased for refurbishment - Pre-refurb baseline EICR documenting the existing installation’s condition - Post-refurb EICR confirming the kept-and-adapted wiring is still satisfactory - Change-of-use conversion EICR — house to flats, commercial to residential, etc. - Periodic inspection on completed phases of a development already in service - EICR alongside an EIC on a project mixing new circuits and retained existing wiring

What the report contains

Standard three-part EICR deliverable: form, schedule of inspection, schedule of test results. For phased developments, we’ll commonly supply a plot-by-plot summary alongside the individual reports so the developer’s project tracker has a single overview document. Where new circuits sit alongside retained wiring, we’ll issue the appropriate EIC for the new work in addition to the EICR for the retained installation. Two documents, two purposes.

Why book CJA Electrical for your Minster-on-Sea EICR

The fit for developer work is around three things: getting the document type right (EIC vs EICR), turning the inspection round inside a project programme, and supplying paperwork that holds up at building control sign-off and at the eventual buyer’s conveyancing stage. Ten years on Swale property means we’ve worked with a fair range of project shapes and don’t need everything explained from scratch.

How the inspection runs

The developer flow: Initial conversation about the project — what’s existing, what’s new, where on the programme the inspection sits. Quote and appointment options out the same day. Inspection coordinated with the site lead. Report PDF inside 48 hours. EIC for new circuits issued separately as work is commissioned. Remedial work, if needed, scoped and quoted to fit the wider build cost.

What affects the price

No standard rate card for developer work — the variability between projects is too high. We’ll quote on receipt of the scope (number of dwellings, refurb vs new vs mixed, programme dates, access constraints) and the price is fixed at that point.

FAQs

What’s the difference between a Minor Works Certificate and an EICR?

A Minor Works Certificate (MWC) is issued for small additions to an existing installation that don’t constitute a new circuit — for example, adding an extra socket on an existing ring main. The MWC documents the modification and confirms it doesn’t compromise the installation’s safety. An EICR is a full periodic inspection of every accessible part of the installation; the two cover very different scopes.

Do you handle EIC issuance alongside EICR work on a project?

Yes. Most developer projects mix retained and new installation work. We’ll issue the EICR for the retained sections and EICs for the new circuits, with both documents formatted for Building Control sign-off and for the eventual buyer’s conveyancing. Single point of contact for both, single project invoice.

Can you work alongside other trades on a live site in Minster-on-Sea?

Yes. Most of our developer work happens on live sites with other trades present. We coordinate with the site manager or principal contractor to fit the inspection slot into the wider programme, and we work to the site’s H&S and access protocols. Minster-on-Sea sites are reached from our Rochester base in around 40 minutes.

Do you supply documentation in a format Building Control accepts?

Yes. EICs and EICRs follow the standard BS 7671 formats that Building Control bodies accept across England. Standard three-part EICR PDF — form, schedule of inspection, schedule of test results — and standard EIC for new circuits with the matching schedule of test results.

How quickly can you turn EICR work round on a developer project?

Same-week appointments are typical for Minster-on-Sea projects, with the report PDF in the project inbox within 48 hours of the visit. For phased developments where multiple plots need inspecting, we batch the visits to keep the cost down and the turnaround tight. Tighter timelines are possible where the project programme demands it.