EICR for Developers in Maidstone, Kent

Developer compliance for electrical work splits into two streams. New installations — circuits added during build, refurb, or conversion — produce an Electrical Installation Certificate (EIC) at commissioning. Existing installations being inspected periodically produce an EICR. We work with Maidstone developers on both: EIC for new work signed off as it goes in, EICR on existing installations inherited through purchase or returned to service after refurb.

What an EICR involves for Developer

Developer EICR scope is most often one of three things. Refurbishment of an existing installation: where the existing wiring is being kept and adapted rather than ripped out, an EICR confirms its current condition before the refurb goes live. Change-of-use conversion: a building being converted from commercial or single-dwelling to multiple dwellings, with the existing wiring carried forward in part. Phased completion handover: a development delivered in stages, where earlier phases have entered service and need periodic inspection. All three follow BS 7671:2018+A2:2022. C1, C2, C3, FI codes apply per the standard. New circuits added as part of the works get an EIC separately at the point they’re commissioned.

When you need this in Maidstone

The triggers for a developer EICR aren’t the same as for a landlord EICR. Most often: an acquisition where the existing electrics need due-diligence inspection before completion; a refurbishment where the existing wiring is being kept in part and the developer needs evidence of its condition; or a phased development where some plots are already lived in and periodic inspection is due on the older phases. None of these scenarios fit the standard “rented property, every five years” template — they’re project-specific.

What the report contains

Reports come back as the standard EICR PDF — form, schedule of inspection, schedule of test results, all in one document. For developer projects we can supply alongside a covering memo summarising the inspection scope, what was in EICR scope vs EIC scope, and any limitations encountered. Failed findings come with remedial quotes for the developer to incorporate into the project cost. Re-test on completion to issue a clean certificate.

Why book CJA Electrical for your Maidstone EICR

For developer work, the value is in getting the documentation right. EIC where it should be an EIC, EICR where it should be an EICR, all formatted correctly for Building Control sign-off and for the eventual buyer’s solicitor. CJA Electrical works to BS 7671:2018+A2:2022 with a City & Guilds 2391 qualified inspector, fully insured, ten years on Maidstone projects. Reports back within 48 hours of testing; remedial quotes attached where needed.

How the inspection runs

What it looks like on a typical Maidstone refurb: Site visit to scope the existing installation. Pre-refurb EICR if the developer wants the starting condition on file. Refurb proceeds. New circuits (where any are added) get an EIC at commissioning. Post-refurb EICR confirms the kept-and-adapted installation is still satisfactory. Final paperwork pack handed over with the project sign-off.

What affects the price

No standard rate card for developer work — the variability between projects is too high. We’ll quote on receipt of the scope (number of dwellings, refurb vs new vs mixed, programme dates, access constraints) and the price is fixed at that point.

FAQs

What about Building Regulations notification on new circuits?

New circuits in dwellings are notifiable work under Building Regulations in England. We issue the appropriate Electrical Installation Certificate (EIC) at commissioning and the developer’s Building Control body takes the notification through standard channels. We don’t act as a self-certification scheme but the EIC documentation is what the BC body needs to sign off the work.

Can you inspect occupied phases of a phased development?

Yes. Where earlier phases have entered service and tenants or buyers are in residence, we coordinate access through the site management team or directly with residents. The inspection itself is the standard EICR — same scope, same format. Periodic inspection on occupied phases is the most common scenario.

Do new builds in Maidstone need an EICR or an EIC?

New builds need an Electrical Installation Certificate (EIC), not an EICR. The EIC is issued by the installing electrician at the point the new installation is commissioned and forms part of the Building Control sign-off documentation. An EICR is a periodic inspection document that applies to existing installations after they’ve entered service — typically five years or more after the EIC was issued.

When during a refurb do I need an EICR vs an EIC?

Existing wiring being kept and adapted as part of a refurbishment is the EICR domain — the report documents the condition of what’s being retained. New circuits added during the refurbishment get their own EIC at the point they’re commissioned. A typical refurb often produces both documents — EICR for the retained installation, EIC for the new circuits.

What’s the difference between a Minor Works Certificate and an EICR?

A Minor Works Certificate (MWC) is issued for small additions to an existing installation that don’t constitute a new circuit — for example, adding an extra socket on an existing ring main. The MWC documents the modification and confirms it doesn’t compromise the installation’s safety. An EICR is a full periodic inspection of every accessible part of the installation; the two cover very different scopes.

Do you handle EIC issuance alongside EICR work on a project?

Yes. Most developer projects mix retained and new installation work. We’ll issue the EICR for the retained sections and EICs for the new circuits, with both documents formatted for Building Control sign-off and for the eventual buyer’s conveyancing. Single point of contact for both, single project invoice.