Labelled consumer unit in a rented property after a landlord EICR

Landlord EICR testing for Canterbury private rented property. Same-week appointments across the area, written report inside 48 hours of testing, certificates supplied in the BS 7671 Appendix 6 format that Canterbury City Council and every major letting agent recognises. Tenant access can be arranged via the agent or directly with the tenant — whichever is easier — and the inspection itself is non-disruptive enough to fit into a single morning or afternoon visit.

What Landlord EICR actually is

A landlord EICR is the same fundamental inspection as any EICR — a visual check of the consumer unit and accessible accessories, plus dead and live testing on every circuit — but commissioned to satisfy the 2020 PRS regulations. The output is a written report against BS 7671:2018+A2:2022, with observation codes (C1/C2/C3/FI) on anything that doesn’t meet the regulations. What’s specific to the landlord version is the documentation flow: the certificate must be supplied to existing tenants within 28 days of the inspection, to new tenants before they take occupation, and to Canterbury City Council on request within 7 days. Reports formatted to the standard BS 7671 layout are accepted across the industry.

When you need Landlord EICR in Canterbury

The 5-yearly cycle plus new-tenancy rule is the headline. The practical scheduling reality for most Canterbury landlords is a rolling diary — set a reminder a couple of months before the certificate expires and book the re-test in good time so any remedials don’t bump the property into out-of-compliance territory at the renewal date. Letting agents typically manage this on behalf of the landlord via a portfolio diary; private landlords often track it via the expiry date on their last certificate. Either way, getting the inspection done a couple of months ahead of expiry gives breathing room for any remedials needed before the deadline actually bites.

Fully labelled domestic consumer unit after EICR testing
Fully labelled domestic consumer unit after EICR testing

Standards and what compliance looks like

The two pieces of paperwork that matter on a landlord EICR are the certificate itself (signed against BS 7671:2018+A2:2022) and the schedule of test results (the appendix recording each individual circuit’s test measurements). Both go to the tenant within 28 days of the inspection and to the council within 7 days of any request. Standards-wise, landlord EICRs aren’t held to a different technical bar than owner-occupied EICRs — same Wiring Regulations, same observation codes, same testing tolerances. The difference is the regulatory wrapper: defined cycle, defined paper trail, defined penalties.

Testing schedule and remedials

On site, landlord EICR testing is non-disruptive — the work is quiet, brief power-downs are limited to 5-10 minutes per circuit, and the testing equipment is non-destructive. Tenants typically don’t need to be home for the whole visit, just to provide access at the start. Testing follows the standard BS 7671 sequence: inspection of the consumer unit and accessories first, then dead testing (continuity, insulation resistance, polarity, ring continuity) on each circuit, then live testing (earth fault loop, RCD operation) once the supply’s restored. Each circuit’s results are recorded individually on the schedule of test results.

RCD and loop impedance testing in progress on a domestic circuit
RCD and loop impedance testing in progress on a domestic circuit

Why Canterbury property owners book CJA Electrical

Three things matter on landlord EICR work: turnaround (certificate inside 48 hours so the agent or landlord can move on the next step), format (BS 7671 Appendix 6 layout that Canterbury City Council accepts), and remedial pricing (clear line-by-line quotes against the report so the landlord can decide what to action). All three are why agents and landlords across Canterbury keep coming back. Operationally, the things that matter on letting work — fast scheduling, agent-friendly comms, certificates direct to the agent if requested — are all covered as standard.

How the work runs

Booking, inspection, certificate, remedials. Booking is a quick call or message to the office, normally with the agent or landlord providing the property and tenant contact details. Standard properties are quoted on the call as a fixed price; unusual ones get a brief site visit before the quote firms up. Inspection is normally inside the working week. Half a day on site for most domestic property. Tenants don’t need to stay in for the whole visit — just to provide access at the start. Certificate goes out as a PDF inside 48 hours, formatted to BS 7671 Appendix 6. Agents typically distribute to the landlord and tenant from there; we can also supply directly to either party as needed.

What affects the price

The two factors that move Canterbury landlord EICR pricing are circuit count (more circuits = more testing time) and access (single visit with full tenant cooperation versus multiple return visits). For straightforward domestic rental property with cooperative tenant access, the price is well-established and quoted up-front. What we don’t do: deposits, hidden charges, or fees beyond the quoted price. The fixed price is what’s invoiced on completion. Remedials are separate so the EICR price is the EICR price.

FAQs

Do I need a fresh EICR every time I get a new tenant?

Not necessarily. The 2020 regulations say a satisfactory EICR must be in place at the start of any new tenancy. If the existing certificate is current (less than 5 years old) and the property hasn’t been altered since, that certificate is valid for the new tenancy too. A fresh EICR is only legally required if the existing one is expired, missing, or unsatisfactory.

Will the inspection disrupt my tenant?

Minimally. The on-site time is half a day for a typical three-bed home. Brief power-downs during dead testing are a few minutes per circuit. The tenant doesn’t need to stay in for the whole visit — just to provide access at the start. We work quietly and leave the property exactly as we found it.

How fast can I get a certificate if I need one urgently?

Same-week is standard. If a tenant move-in or insurance renewal deadline is tight, we can usually fit an inspection in within 24-48 hours of booking. Reports are turned around same-evening or next-morning where the deadline calls for it — just let us know up front.

Do I need a separate certificate for each property in my portfolio?

Yes. Each rental property needs its own EICR — addresses, circuit details, and observations are property-specific. For portfolio landlords with several properties due at the same time, we can schedule the visits efficiently and bulk-deliver the certificates so the agent has the full portfolio in hand at once.

What about EICRs for HMOs?

HMO landlord EICRs follow the same 5-yearly cycle as ordinary rented homes, but typically also align with the HMO licence cycle issued by Canterbury City Council. HMOs often have shared common-parts circuits (corridor lighting, fire alarm interface, escape route lighting) that get tested separately. We work to whatever the council specifically requires for the licence renewal.

Do I have to do an EICR every 5 years on a rental?

Yes. Since June 2020, every privately rented home in England must have a satisfactory EICR every 5 years and at the start of each new tenancy. The certificate must be supplied to tenants within 28 days of the inspection and to Canterbury City Council on request within 7 days.

Related services in Canterbury

Landlord EICR in nearby towns

Frequently asked questions

Do I need a fresh EICR every time I get a new tenant?

Not necessarily. The 2020 regulations say a satisfactory EICR must be in place at the start of any new tenancy. If the existing certificate is current (less than 5 years old) and the property hasn't been altered since, that certificate is valid for the new tenancy too. A fresh EICR is only legally required if the existing one is expired, missing, or unsatisfactory.

Will the inspection disrupt my tenant?

Minimally. The on-site time is half a day for a typical three-bed home. Brief power-downs during dead testing are a few minutes per circuit. The tenant doesn't need to stay in for the whole visit — just to provide access at the start. We work quietly and leave the property exactly as we found it.

How fast can I get a certificate if I need one urgently?

Same-week is standard. If a tenant move-in or insurance renewal deadline is tight, we can usually fit an inspection in within 24-48 hours of booking. Reports are turned around same-evening or next-morning where the deadline calls for it — just let us know up front.

Do I need a separate certificate for each property in my portfolio?

Yes. Each rental property needs its own EICR — addresses, circuit details, and observations are property-specific. For portfolio landlords with several properties due at the same time, we can schedule the visits efficiently and bulk-deliver the certificates so the agent has the full portfolio in hand at once.

What about EICRs for HMOs?

HMO landlord EICRs follow the same 5-yearly cycle as ordinary rented homes, but typically also align with the HMO licence cycle issued by Canterbury City Council. HMOs often have shared common-parts circuits (corridor lighting, fire alarm interface, escape route lighting) that get tested separately. We work to whatever the council specifically requires for the licence renewal.

Do I have to do an EICR every 5 years on a rental?

Yes. Since June 2020, every privately rented home in England must have a satisfactory EICR every 5 years and at the start of each new tenancy. The certificate must be supplied to tenants within 28 days of the inspection and to Canterbury City Council on request within 7 days.

Get a quote

Send a quick message and you'll get a same-day reply during working hours. Skip straight to phone or WhatsApp if you prefer.

EICR detail (helps with the quote)

Or skip the form: Call 07598 216512 WhatsApp info@cjaelectrical.co.uk