EICR in Canterbury

Periodic inspection and testing in Canterbury — what most people just call an EICR. The work covers a visual inspection of the consumer unit and accessible accessories, dead and live testing on every circuit, and a written report with each observation coded against BS 7671. Common drivers in Canterbury: a 5-yearly landlord check, a pre-sale or pre-purchase EICR, an insurer asking for current documentation, or a homeowner whose installation hasn’t been tested in a decade.

What EICR actually is

An EICR is a formal inspection and test of the fixed wiring in a property — the consumer unit, every circuit running off it, every accessible socket, switch, and light fitting. The output is a written report with observation codes against anything that’s not satisfactory: C1 for immediate danger, C2 for potentially dangerous (also a fail), C3 for improvement recommended, FI for further investigation required. A satisfactory report has no C1 or C2 observations. A property with C3 observations alone still passes. The report is what landlords need for the PRS regulations, what surveyors check on sale, and what insurers reference when validating a claim.

When you need EICR in Canterbury

The triggers we see most often on Canterbury EICR enquiries: landlord on the 5-yearly cycle (the largest single category); a tenancy changeover where the agent or landlord wants a fresh report; a pre-sale where the vendor wants documentation on the contract pack; a buyer who’s had the surveyor flag the electrics on a Level 2 or Level 3 report; an insurance renewal requiring current documentation; and homeowners who haven’t had the property tested for a decade or more. For older period property in Canterbury, sometimes it’s a fault that prompts the booking — a circuit that keeps tripping, a socket that’s stopped working, a burning smell from the consumer unit. We’ll often diagnose the immediate fault on the visit and roll into a full EICR while we’re there.

Standards and what compliance looks like

The two regulatory references that matter on a Canterbury EICR are BS 7671 (the technical standard the inspection works to) and, for rental property, the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020 (the law requiring landlords to have a current report). The current edition of BS 7671 is the 18th Edition with Amendment 2 (2022). Reports reference the edition in force at the date of inspection. The PRS regulations require the certificate to be supplied to tenants within 28 days of the inspection and to Canterbury City Council on request within 7 days.

Fittings and where they go

Inspection scope is “what’s accessible without destruction” — we don’t lift floorboards or break into walls. The consumer unit comes off, every socket and switch plate is checked visually, every light fitting that’s reachable is inspected, and we go into lofts, cellars, outbuildings, and meter cupboards where they exist. For the hidden parts of the installation — buried cables, junctions inside walls — the live testing catches structural faults via insulation resistance (low values mean cable damage or moisture ingress) and earth fault loop impedance (high values mean a poor earth path). The combination of visual and test results is what builds the picture of installation condition.

Testing schedule and remedials

Testing splits into dead testing (with the circuit isolated) and live testing (with the supply restored). Dead tests cover continuity of protective conductors, insulation resistance between live and earth, polarity, and ring final continuity on socket circuits. Live tests cover earth fault loop impedance, prospective fault current, and RCD operation times. Each circuit’s results are recorded individually on the schedule of test results that accompanies the certificate. For a typical three-bed property in Canterbury the on-site time is half a day. Larger or older properties with more circuits can take a full day. The brief power-down for dead testing on each circuit is usually a few minutes per circuit — long enough to put kettles and computers off the boil, short enough that nothing in the fridge defrosts.

Why Canterbury property owners book CJA Electrical

Three things matter on EICR work and they all sit on the inspector: technical accuracy (the right observations coded correctly), report quality (clearly written, properly formatted to BS 7671 Appendix 6), and turnaround (the report in your hands inside 48 hours, not a week later). All three are why Canterbury clients keep coming back. On the practical side: same-day quote, scheduled inspection inside the working week, PDF report direct to your inbox or your agent’s, and remedial work quoted line-by-line against the report so you can decide what to action.

How the work runs

Step one — quick chat about the property: how many bedrooms, rough age of the consumer unit, any known issues, any access constraints (tenanted property, occupied during works, working hours preferences). Most quotes are confirmed on that initial call as a fixed price, with larger or unusual properties going to a brief site visit before the quote firms up. Step two — testing visit. Half a day to a full day on site for most domestic property; longer for larger or multi-installation premises. Brief power-downs during dead testing flagged in advance. Step three — the report. PDF inside 48 hours, formatted to BS 7671 Appendix 6, with the schedule of test results, schedule of inspections, and observations all in the standard format insurers and agents expect to see.

What affects the price

EICR pricing is mostly driven by the size of the installation — circuit count more than floor area. A small flat with a single consumer unit and 6-8 circuits is at one end; a larger detached property with two consumer units, an outbuilding sub-board, and 20+ circuits is at the other. Most Canterbury three-bed homes come in as a fixed price after a brief chat about the property. What’s included: the on-site inspection, the testing, the written report, and certificate delivery as a PDF. Remedial work — if anything is unsatisfactory — is quoted separately so you can shop around if you want and so the inspection price stays clean and predictable.

FAQs

What if I disagree with an observation on the report?

Talk to us. Each observation has reasoning behind the coding — usually clear regulatory references — and we’ll walk through any specific item if you want to understand the call. Genuine reconsideration on borderline calls is fine; we don’t dig in for the sake of it.

Does an EICR cover gas, water, or appliances?

No. The EICR is a fixed-wiring inspection only — the consumer unit and circuits, plus accessories like sockets and switches. Gas certification is a Gas Safe registered engineer’s job; water leak detection is a plumber’s; appliance testing (PAT testing) is a separate service. We can refer to trusted local trades for any of those.

What if my property has more than one consumer unit?

Common in larger Canterbury properties — main board plus a garage or outbuilding sub-board, occasionally a separate board for a flat conversion or annexe. Each board is inspected separately and gets its own schedule of test results. The price reflects the additional testing time; we’ll confirm a fixed all-in number at quoting stage.

Can the report be supplied to my agent or council directly?

Yes — the PDF can go to you, your letting agent, your council, your insurer, or all of the above. Canterbury City Council accepts the standard BS 7671 Appendix 6 format, as do all the major letting agents and managing agents we’ve worked with.

How long does an EICR take?

Half a day for a typical Canterbury three-bed home. Smaller flats can be done in a couple of hours; larger properties with multiple consumer units or extensive outbuildings can take a full day. We give a realistic estimate at quoting stage based on circuit count and access.

Do I need to be present during the inspection?

For owner-occupied property, ideally yes — there’ll be brief power-downs as each circuit is tested, and someone needs to be aware in case sensitive equipment needs warning. For tenanted property, tenant access can be arranged via the letting agent or directly with the tenant; landlord attendance isn’t necessary.

What’s the difference between a Satisfactory and Unsatisfactory report?

A satisfactory report has no C1 (immediate danger) or C2 (potentially dangerous) observations. C3 observations (improvement recommended) on their own don’t fail the report. An unsatisfactory report means C1 or C2 observations are present and the installation needs remedial work to bring it back to compliance.