Electrician in Tonbridge
Tonbridge is a market town in west Kent, reached from the Rochester base via the A26.
Need a reliable electrician in Tonbridge, Kent? CJA Electrical works right across the town, from the town centre out to the surrounding estates. Ten years on the tools across Kent means most of what comes up, period wiring, tired fuse boards, dead sockets, landlord paperwork, is familiar ground. You deal with one person from the first call to the final report, and the quote is fixed before the work begins.
What an electrician in Tonbridge covers
Services across Tonbridge run from a five-minute fix to a full rewire. Landlords and sellers come for EICRs and safety certificates; homeowners for fuse board upgrades, extra sockets, new lighting, and faults that need chasing down. We also fit mains-wired smoke and heat alarms, install outdoor and security lighting, and carry out commercial EICRs for Tonbridge and Malling businesses. If a job turns out to need something we’d recommend a specialist for, we’ll say so rather than take it on regardless.
The properties we work on in Tonbridge
Tonbridge has a wide housing mix, Edwardian and Victorian property in the older streets, lots of inter-war and post-war development further out. Older stock is the more common driver of EICR remedials. Property age is the single biggest factor in how a Tonbridge job plays out. A Victorian or Edwardian house may have rubber- or fabric-insulated cabling lurking behind the modern face of the installation; an inter-war semi often hides an undersized fuse board; a recent build is usually sound but still accumulates small observations over time. We price each property on what’s actually in front of us, not a flat per-circuit rate.

Common electrical work in Tonbridge and Malling
Across Tonbridge and Malling the recurring themes are safety upgrades and small improvements. Safety first: replacement consumer units, additional bonding, and putting right anything an EICR has flagged. Improvements next: more sockets, better lighting, outdoor power, and electric vehicle-ready circuits where the supply allows. The point of contact is always the same person, so nothing gets lost between a quote and the work.
EICRs and landlord compliance in Tonbridge
If you let property in Tonbridge, the EICR isn’t optional. Under the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020, every privately rented home needs a satisfactory EICR at least every five years and at the start of any new tenancy. Tonbridge and Malling Borough Council can issue civil penalties of up to £30,000 for non-compliance, so the cycle is worth staying on top of. We supply the report as a PDF within 48 hours of testing, in the standard format your agent or council will accept, and quote any remedial work separately so you can decide how to proceed.

Why Tonbridge property owners choose CJA Electrical
What sets CJA Electrical apart in Tonbridge is consistency. It’s the same electrician on every visit, so you’re not re-explaining the job to a stranger each time. We’re around 55 minutes from our Rochester base, which keeps both booked work and emergencies responsive, and we’re fully insured for your peace of mind. Most importantly the work is quoted honestly and done properly: the kind of job you’d be happy to recommend to a neighbour.
How a job runs
Getting work done in Tonbridge doesn’t need to be complicated. One message with the address and a description, one fixed quote, one appointment at a convenient time, one tidy finish. For inspections, one PDF report within 48 hours of testing. If anything needs putting right, you get an itemised quote and the freedom to decide. Same electrician throughout, so nothing falls through the cracks between the quote and the work.
Credentials, insurance and how we work
For peace of mind in Tonbridge: fully qualified (City & Guilds 2391, 2382 and 2365) and fully insured, with £1 million public liability and £100,000 professional indemnity. All inspection and testing follows BS 7671. The certificates are the baseline; the decade of hands-on experience across the Tonbridge and Malling housing stock is what you’re really paying for, because it means the job is quoted right and done right the first time.
Our Tonbridge services
From our Rochester base, Tonbridge is around 55 minutes away. We cover the full range of domestic electrical work in the town:
EICR in Tonbridge
An EICR (Electrical Installation Condition Report) is a formal inspection of the fixed wiring in a property, the consumer unit,...
Learn more →Landlord EICR in Tonbridge
Since June 2020, every privately rented home in England must have a satisfactory EICR every five years and at the start of any new...
Learn more →Emergency in Tonbridge
When something's gone wrong with the electrics, power's off, a circuit keeps tripping, a socket's stopped working, or there's a burning...
Learn more →Alarms in Tonbridge
Smoke alarms save lives, but only if they're sited and wired correctly. CJA Electrical is an Aico Expert Installer, manufacturer-trained...
Learn more →Emergency Lighting in Tonbridge
Emergency lighting keeps escape routes lit when the mains fails. CJA Electrical fits and tests BS 5266 compliant systems across Kent,...
Learn more →Commercial EICR in Tonbridge
Fixed wire testing, also known as a Commercial EICR, is the periodic inspection and test that satisfies the Electricity at Work...
Learn more →Outdoor Lighting in Tonbridge
Outdoor lighting transforms how a property looks and works after dark. From low-voltage garden runs lighting up planting and steps, to...
Learn more →Nearby
We also cover:
- Tunbridge Wells, Tunbridge Wells
- Sevenoaks, Sevenoaks
- Maidstone, Maidstone
Frequently asked questions
What does an EICR actually check?
An EICR is both a visual inspection and an electrical test. The consumer unit is opened and inspected, every accessible socket, switch and light fitting is checked, and every circuit gets dead and live testing: continuity, insulation resistance, polarity, earth fault loop, and RCD operation. The result is a written report with each observation coded against BS 7671.
What do C1, C2 and C3 mean on my report?
They're observation codes. C1 means immediate danger and needs sorting straight away. C2 means potentially dangerous and also fails the report. C3 is "improvement recommended" and does not fail it. A report is satisfactory with no C1 or C2 items; C3s alone still pass. We'll always explain in plain English what any code means for your Tonbridge property.
My fuse board looks old, does it need replacing?
Not always, but an older rewireable or split-load board with no RCD protection is a common reason a property doesn't pass an EICR. A modern consumer unit puts RCD protection on every circuit and brings the installation up to current standards. We'll tell you honestly whether yours genuinely needs changing or whether it's still safe to leave, no pressure to replace something that doesn't need it.
Can you do small jobs, or only big ones?
Small jobs are very welcome: a single socket, a faulty light, a quick fault-find. Plenty of Tonbridge customers come first for something minor and then come back for the larger work. Nothing is too small to ask about, and if a phone call can solve it without a visit, we'll happily tell you that.
Are you insured and qualified?
Yes, fully insured with £1 million public liability and £100,000 professional indemnity, and qualified to City & Guilds 2391 (inspection and testing), 2382 (current wiring regulations) and 2365 (electrical installation). All inspection and testing is carried out to BS 7671, the UK wiring standard.
Get a quote
Send a quick message and you'll get a same-day reply during working hours. Skip straight to phone or WhatsApp if you prefer.
Or skip the form: Office 01634 907123 Mobile 07598 216512 WhatsApp info@cjaelectrical.co.uk