Higham Developer EICR

Developer EICR work is more nuanced than landlord or homeowner work because the obvious question — “do I need an EICR on my new build?” — has a precise answer that’s often “no, you need an EIC”. CJA Electrical works with developers across Higham and the wider Gravesham area on the situations where an EICR is actually the right document: refurbishments of existing installations, change-of-use conversions where the wiring is being adapted rather than replaced, and periodic inspection of completed phases that have entered service.

What an EICR involves for Developer

Developer EICR scope is most often one of three things. Refurbishment of an existing installation: where the existing wiring is being kept and adapted rather than ripped out, an EICR confirms its current condition before the refurb goes live. Change-of-use conversion: a building being converted from commercial or single-dwelling to multiple dwellings, with the existing wiring carried forward in part. Phased completion handover: a development delivered in stages, where earlier phases have entered service and need periodic inspection. All three follow BS 7671:2018+A2:2022. C1, C2, C3, FI codes apply per the standard. New circuits added as part of the works get an EIC separately at the point they’re commissioned.

When you need this in Higham

The triggers for a developer EICR aren’t the same as for a landlord EICR. Most often: an acquisition where the existing electrics need due-diligence inspection before completion; a refurbishment where the existing wiring is being kept in part and the developer needs evidence of its condition; or a phased development where some plots are already lived in and periodic inspection is due on the older phases. None of these scenarios fit the standard “rented property, every five years” template — they’re project-specific.

What the report contains

Reports come back as the standard EICR PDF — form, schedule of inspection, schedule of test results, all in one document. For developer projects we can supply alongside a covering memo summarising the inspection scope, what was in EICR scope vs EIC scope, and any limitations encountered. Failed findings come with remedial quotes for the developer to incorporate into the project cost. Re-test on completion to issue a clean certificate.

Why book CJA Electrical for your Higham EICR

For developer work, the value is in getting the documentation right. EIC where it should be an EIC, EICR where it should be an EICR, all formatted correctly for Building Control sign-off and for the eventual buyer’s solicitor. CJA Electrical works to BS 7671:2018+A2:2022 with a City & Guilds 2391 qualified inspector, fully insured, ten years on Gravesham projects. Reports back within 48 hours of testing; remedial quotes attached where needed.

How the inspection runs

1. Project scope conversation — what’s being inspected, where it sits in the project programme, what other trades are on site 2. Quote with appointment options that fit the project programme 3. On-site inspection — coordinated with the site manager or principal contractor as needed 4. Written report (PDF) supplied within 48 hours 5. Where new circuits are involved, EIC issued separately at commissioning 6. Remedial work quoted alongside any unsatisfactory findings; re-test on completion

What affects the price

Developer EICR work is priced per inspection scope. Refurbishment baseline EICR on a single dwelling is priced like a domestic EICR. Phased-development work is priced per plot or per block depending on what’s being inspected. EIC work for new circuits is priced separately by circuit count. Get in touch with the project scope and we’ll come back with a fixed quote.

FAQs

Do new builds in Higham need an EICR or an EIC?

New builds need an Electrical Installation Certificate (EIC), not an EICR. The EIC is issued by the installing electrician at the point the new installation is commissioned and forms part of the Building Control sign-off documentation. An EICR is a periodic inspection document that applies to existing installations after they’ve entered service — typically five years or more after the EIC was issued.

When during a refurb do I need an EICR vs an EIC?

Existing wiring being kept and adapted as part of a refurbishment is the EICR domain — the report documents the condition of what’s being retained. New circuits added during the refurbishment get their own EIC at the point they’re commissioned. A typical refurb often produces both documents — EICR for the retained installation, EIC for the new circuits.

What’s the difference between a Minor Works Certificate and an EICR?

A Minor Works Certificate (MWC) is issued for small additions to an existing installation that don’t constitute a new circuit — for example, adding an extra socket on an existing ring main. The MWC documents the modification and confirms it doesn’t compromise the installation’s safety. An EICR is a full periodic inspection of every accessible part of the installation; the two cover very different scopes.

Do you handle EIC issuance alongside EICR work on a project?

Yes. Most developer projects mix retained and new installation work. We’ll issue the EICR for the retained sections and EICs for the new circuits, with both documents formatted for Building Control sign-off and for the eventual buyer’s conveyancing. Single point of contact for both, single project invoice.

Can you work alongside other trades on a live site in Higham?

Yes. Most of our developer work happens on live sites with other trades present. We coordinate with the site manager or principal contractor to fit the inspection slot into the wider programme, and we work to the site’s H&S and access protocols. Higham sites are reached from our Rochester base in around 15 minutes.

Do you supply documentation in a format Building Control accepts?

Yes. EICs and EICRs follow the standard BS 7671 formats that Building Control bodies accept across England. Standard three-part EICR PDF — form, schedule of inspection, schedule of test results — and standard EIC for new circuits with the matching schedule of test results.

How quickly can you turn EICR work round on a developer project?

Same-week appointments are typical for Higham projects, with the report PDF in the project inbox within 48 hours of the visit. For phased developments where multiple plots need inspecting, we batch the visits to keep the cost down and the turnaround tight. Tighter timelines are possible where the project programme demands it.