Electrician in Dartford
Dartford sits on the western edge of our Kent service area, just over the Bridge from the Medway towns. Booked work via the A2.
CJA Electrical is a local electrician covering Dartford and the wider Dartford area. We handle the full range of domestic work: EICRs and landlord compliance, emergency callouts and fault-finding, consumer unit changes, extra sockets and lighting, smoke and heat alarms, and outdoor circuits. We’re around 40 minutes from our Rochester base, so Dartford appointments are usually available the same week, and the people who quote the job are the ones who turn up to do it.
What an electrician in Dartford covers
Services across Dartford run from a five-minute fix to a full rewire. Landlords and sellers come for EICRs and safety certificates; homeowners for fuse board upgrades, extra sockets, new lighting, and faults that need chasing down. We also fit mains-wired smoke and heat alarms, install outdoor and security lighting, and carry out commercial EICRs for Dartford businesses. If a job turns out to need something we’d recommend a specialist for, we’ll say so rather than take it on regardless.
The properties we work on in Dartford
Dartford has a wide housing mix, Victorian and Edwardian terraces near the town centre, large post-war and ex-LCC estates, and newer riverfront development. Older terraced rental stock drives most of the EICR enquiries. Property age is the single biggest factor in how a Dartford job plays out. A Victorian or Edwardian house may have rubber- or fabric-insulated cabling lurking behind the modern face of the installation; an inter-war semi often hides an undersized fuse board; a recent build is usually sound but still accumulates small observations over time. We price each property on what’s actually in front of us, not a flat per-circuit rate.

Common electrical work in Dartford
A typical run of Dartford jobs covers consumer unit changes, fault-finding, socket and lighting additions, and alarm work. Faults are the unpredictable ones (a circuit that won’t reset, a socket that’s stopped working, a persistent tripping problem) and we’ll triage those on the phone first, since sometimes the answer saves you a callout entirely. The planned work, from a single socket to a rewire, is always priced before it starts.
EICRs and landlord compliance in Dartford
Landlord compliance is the core of what we do in Dartford. The 2020 PRS regulations require a satisfactory EICR every five years and before each new tenancy, with the certificate supplied to tenants and to Dartford Borough Council on request. Penalties for going without run to £30,000. We work directly with you or your letting agent to arrange tenant access, turn the report around inside 48 hours, and, if anything fails, quote the remedials clearly so there’s a straightforward path back to a satisfactory certificate.

Why Dartford property owners choose CJA Electrical
Dartford customers tend to come back, and refer others, for the same few reasons. The quote is fixed before the work starts, so the invoice holds no surprises. The work is tidy and the place is left clean. And the advice is straight: no upselling, no scare tactics about your wiring, just a clear picture of what’s safe, what’s recommended, and what can wait. Being a one-person business keeps the overheads, and the prices, sensible.
How a job runs
Most Dartford jobs follow the same simple path. You get in touch with the address and a few details about the property and the work. We give you a fixed quote, usually the same day, and book a time that suits. On the day we carry out the work or testing, talk you through anything we find, and for an EICR send the written report through within 48 hours. If remedial work is needed, it’s quoted separately so you can decide what to do next, with no pressure either way.
Credentials, insurance and how we work
Reassurance matters when someone’s working on your wiring, so for the record: CJA Electrical holds City & Guilds 2391, 2382 and 2365, carries £1 million public liability and £100,000 professional indemnity cover, and tests everything to BS 7671. Ten years on the tools across Kent means the local housing, from period homes to modern estates, is familiar territory, and that shows up as fewer surprises once a job is under way.
Our Dartford services
From our Rochester base, Dartford is around 40 minutes away. We cover the full range of domestic electrical work in the town:
EICR in Dartford
An EICR (Electrical Installation Condition Report) is a formal inspection of the fixed wiring in a property, the consumer unit,...
Learn more →Landlord EICR in Dartford
Since June 2020, every privately rented home in England must have a satisfactory EICR every five years and at the start of any new...
Learn more →Emergency in Dartford
When something's gone wrong with the electrics, power's off, a circuit keeps tripping, a socket's stopped working, or there's a burning...
Learn more →Alarms in Dartford
Smoke alarms save lives, but only if they're sited and wired correctly. CJA Electrical is an Aico Expert Installer, manufacturer-trained...
Learn more →Emergency Lighting in Dartford
Emergency lighting keeps escape routes lit when the mains fails. CJA Electrical fits and tests BS 5266 compliant systems across Kent,...
Learn more →Commercial EICR in Dartford
Fixed wire testing, also known as a Commercial EICR, is the periodic inspection and test that satisfies the Electricity at Work...
Learn more →Outdoor Lighting in Dartford
Outdoor lighting transforms how a property looks and works after dark. From low-voltage garden runs lighting up planting and steps, to...
Learn more →Nearby
We also cover:
- Longfield, Dartford
- Gravesend, Gravesham
- Northfleet, Gravesham
Frequently asked questions
What does an EICR actually check?
An EICR is both a visual inspection and an electrical test. The consumer unit is opened and inspected, every accessible socket, switch and light fitting is checked, and every circuit gets dead and live testing: continuity, insulation resistance, polarity, earth fault loop, and RCD operation. The result is a written report with each observation coded against BS 7671.
What do C1, C2 and C3 mean on my report?
They're observation codes. C1 means immediate danger and needs sorting straight away. C2 means potentially dangerous and also fails the report. C3 is "improvement recommended" and does not fail it. A report is satisfactory with no C1 or C2 items; C3s alone still pass. We'll always explain in plain English what any code means for your Dartford property.
My fuse board looks old, does it need replacing?
Not always, but an older rewireable or split-load board with no RCD protection is a common reason a property doesn't pass an EICR. A modern consumer unit puts RCD protection on every circuit and brings the installation up to current standards. We'll tell you honestly whether yours genuinely needs changing or whether it's still safe to leave, no pressure to replace something that doesn't need it.
Can you do small jobs, or only big ones?
Small jobs are very welcome: a single socket, a faulty light, a quick fault-find. Plenty of Dartford customers come first for something minor and then come back for the larger work. Nothing is too small to ask about, and if a phone call can solve it without a visit, we'll happily tell you that.
Are you insured and qualified?
Yes, fully insured with £1 million public liability and £100,000 professional indemnity, and qualified to City & Guilds 2391 (inspection and testing), 2382 (current wiring regulations) and 2365 (electrical installation). All inspection and testing is carried out to BS 7671, the UK wiring standard.
Get a quote
Send a quick message and you'll get a same-day reply during working hours. Skip straight to phone or WhatsApp if you prefer.
Or skip the form: Office 01634 907123 Mobile 07598 216512 WhatsApp info@cjaelectrical.co.uk